Looks like you're using an unsupported browser, so some features might not work. We recommend upgrading your browser for a better experience.
Home   >   Engine   >   Cams & Valvetrain   >   Camshafts

Tomei PROCAM Camshaft Set, VQ35DE RevUp - Nissan 350Z / Infiniti G35

Manufacturer: Tomei
Product # {{ productPartNumber }}
Discontinued / No Longer Available
This item has been discontinued by the manufacturer, and it can no longer be ordered or purchased.

Discontinued

Manufacturer: Tomei
Product # {{ productPartNumber }}

Customer Questions

Question:

Do you have these in stock or are they shipped from Japan? If shipped from japan, what is the normal lead time? - Johnny Tran

Answer:

These are normally made to order and take 4-6 weeks to ship in from Japan.

Discontinued

Description

Tomei PonCam and ProCam are a popular choice for camshafts. With Tomei's extensive dyno testing and years of experience, these camshafts are optimized for each application. Tomei normally starts off with 256 degree for low profile application that requires an overall improvement in power band without sacrificing low end. With higher power in mind, Tomei develops the 260 degree version to focus on mid to high rpm. Then comes the 270 and 280 degree versions that focus mainly on high rpm to extract maximum horsepower from the engine.

Upgrading the Valve Springs is required when using Camshafts with Cam Lift greater than 11.0mm (sold separately).

When using Camshafts with Cam lift greater than 11.0mm on the intake side there is a chance that the valves can come into contact with the piston when the eVTC advances the timing. In this case it is highly recommended to recess the pistons to guarantee adequate clearance.
Example: The standard advance amount with the stock head and stock pistons with the eVTC will require approximately 1mm valve recess on the piston

Specifications & Application Guide

Engine Duration Max Cam Lift Bank Max Valve Lift Cold Valve
Clearance (±0.01)
Valve Timing
Center Line
Base Circle Part No.
VQ35DE RevUp 264° 10.80mm Intake 10.50mm In: 030mm
Ex: 0.33mm
In: 125°
Ex: 126°
Φ35.5mm 142031
Exhaust 10.47mm 142032
272° Intake 10.50mm 142033
Exhaust 10.47mm 142034
11.30mm Intake 11.00mm 142035
11.00mm Exhaust 10.67mm 142036
280° 11.30mm Intake 11.00mm 142037
11.00mm Exhaust 10.67mm 142038

Compatibility

If you have questions about vehicle fitment, please contact us.

Customer Questions

Question:

Do you have these in stock or are they shipped from Japan? If shipped from japan, what is the normal lead time? - Johnny Tran

Answer:

These are normally made to order and take 4-6 weeks to ship in from Japan.

Copyright 2024 Concept Z Performance